Customer loginKontakt
Engineering BABSy KLINGER Engineering

KLINGER BABSy

Modules

KLINGER BABSy

All modules, sheets and further information at a glance.

 

DIN EN13445-3 Unfired pressure vessels

 

BBSYEN01 EN13445-3, Cylinder and spherical shells, subject to internal pressure  
BBSYEN02 EN13445-3, Dished heads, subject to internal pressure  
BBSYEN03 EN13445-3, EN13445-3, Conical shells, subject to internal pressure  
BBSYEN04 EEN13445-3, Shells subject to external pressure  

BABSy - Klinger Engineering

BBSYEN05 EN13445-3, Openings in cylinder- and spherical shells  
BBSYEN06 EN13445-3, EN13445-3, Flat heads and covers  
BBSYEN07 EN13445-3, Flanged connections  
BBSYEN08 EN13445-3, Spherically domed and bolted ends  
BBSYEN09 EN13445-3, Tube sheets  
BBSYEN10 EN13445-3, Compensators  
BBSYEN11 EN13445-3, Rectangular pressure vessels  
BBSYEN12 EN13445-3, EN13445-3, External nozzle loads in cylinder and spherical shells  
BBSYEN13 EN13445-3, Lifting lugs  
BBSYEN14 EN13445-3, Vessels supported by saddles  
BBSYEN15 EN13445-3, Vessels supported by lugs  
BBSYEN16 EN13445-3, Vessels with feet at dished head  
BBSYEN17 EN13445-3, Vessel with skirt supports  
BBSYEN18 EN13445-3, Vessels supported by rings  
BBSYEN20 EN13445-3, Complex dynamic load analysis  
BBSYEN21 EN13445-3, Derivation of the test pressure  
BBSYEN_G EN13445-3, Optimized flanged connections acc. App. G (equal to EN1591)  

DIN EN13480-3 Design of Metallic Piping

 

BBSYE48001 EN13480-3, Cylinder shells, chapter 6.1  
BBSYE48002 EN13480-3, Elbows, chapter 6.2 and annex B  
BBSYE48003 EN13480-3, Mitred bends subject to internal pressure, chapter 6.3  
BBSYE48004 EN13480-3, Conical shells, subject to internal pressure, chapter 6.4  

BBSYE48005 EN13480-3, Flanged connections, chapter 6.6  
BBSYE48006 EN13480-3, Dished heads, subject to internal pressure, chapter 7.1 *)  
BBSYE48007 EN13480-3, Flat heads and covers, chapter 7.2 *)  
BBSYE48008 EN13480-3, EN13480-3, Openings in cylinder- and spherical shells, chapter 8  
BBSYE48009 EN13480-3, Shells subject to external pressure, chapter 9  
BBSYE48010 EN13480-3, Rectangular lugs, chapter 11 *)  
BBSYE48011 EN13480-3, Y-Fittings, chapter 8  
BBSYE48012 EN13480-3, Dynamic load analysis, chapter 10  
BBSYE48013 EN13480-3, Compensators, annex C *)  
BBSYE480014 EN13480-3, Derivation of the test pressure  

Module AD-2000 (German)

BBSYB1   AD Sheet B1: Cylinder and spherical shells, int. pressure
BBSYB2   AD Sheet B2: Conical shells, internal/external pressure
BBSYB3   AD Sheet B3: Dished heads internal/external pressure
BBSYB4   AD Sheet B4: Spherically domed and bolted ends
BBSYB5A    AD SheetB5: Part 1: Flat heads and covers
BBSYB5B   AD Sheet B5: Part 2: Tube sheets
BBSYB6   AD Sheet B6: Cylinder shells subj. to external pressure

BBSYB7  AD Sheet B7: Bolts
BBSYB8      AD Sheet B8: Flanges
BBSYB9 AD Sheet B9: Openings in cylinder- and spherical shells
BBSYB10     AD Sheet B10: Thick walled pipes
BBSYB13 AD Sheet B13: Compensators
BBSYB11    AD-B1, addendum 1 Elbows
BBSYB51 AD-B5, addendum 1: Pipes with rectangular cross-section
BBSYB01 AD Sheet S1: Limits of static and dynamic loads
BBSYB02 AD Sheet S2: Dynamic loads analysis2
BBSYB31 AD Sheet S3/1: Skirts
BBSYB32 AD Sheet S3/2: Vessels on saddles
BBSYB33 AD Sheet S3/3: Vessels with feet at dished head
BBSYB34 AD Sheet S3/4: Lugs
BBSYB35 AD Sheet S3/5: Vessels at support rings
BBSYB36 AD SheetS3/6: External loads on nozzles using WRC107 and WRC297
BBSYHP30 AD SheetHP30: Derivation of the test pressure
If you are interested in further fact sheets or information -
you will find them here:
British Standard BS5500
BBSYBS1 PD5500: Cylinder and spherical shells subject to internal pressure  
BBSYBS2 PD5500: Cones subject to internal pressure  
BBSYBS3 PD5500: Dished heads subject to internal pressure  
BBSYBS4    PD5500: Spherically domed and bolted ends  
BBSYBS5   PD5500: Flat heads  
BBSYBS6  PD5500: Tube sheets  
BBSYBS7 PD5500: Cylinder, spheres and cones subject to external pressure  
BBSYBS8 PD5500: Bolted flange connections  
BBSYBS9  PD5500: Openings (according appendix F)  
BBSYBSG2 PD5500: Integral attachments, lugs and nozzles with external loads  
BBSYBSG3  PD5500: Vessels on saddles  

 

BBSYAS1 UG-27: Cylinder and spheres subject to internal pressure
BBSYAS2 UG-32: Conical shells subject to internal pressure
BBSYAS3 UG-32: Dished heads subject to internal pressure
BBSYAS5 UG-34: Flat heads and covers, UG39 openings in flat heads
BBSYAS7 Cylinders, spheres and cones subject to external pressure
BBSYAS8 App. 2: Bolted circular flange connections
BBSYAS9 UG-37ff: Openings
BBSYUHX Tube sheets
BBSYAS99 UG-99, UG-100: Derivation of the hydraulic and pneumatic test pressure
BBSYAS21         Cylinder and spheres subject to internal pressure, chapter 4.3.3.
BBSYAS22 Conical shells subject to internal pressure, chapters 4.3.4, 4.3.11-4.3.13
BBSYAS23 Dished heads subject to internal pressure, chapters 4.3.6, 4.3.7
BBSYAS25 Flat heads and covers and openings, chapters 4.6, 4.5.12
BBSYAS28 Bolted circular flange connections, chapter 4.16
BBSYAS29 Openings, chapter 4.5
ASWPACK Package ferrous ASME-Material
BBSYAN31 Pipes acc. ASME/ANSI B31.1 (Power plants)
BBSYA31B Elbows acc. ASME/ANSI B31.1/ASME III
BBSYASGM Mitred bends acc. ASME/ANSI B31.1
BBSYAN19 Openings acc. ASME/ANSI B31.1 (Power plants)
BBSYAN33 Pipes acc. ASME/ANSI B31.3 (Process pipes)
BBSYA33B Elbows acc. ASME/ANSI B31.3
BBSYAN39 Openings acc. ASME/ANSI B31.3 (Process pipes)
BBSYAN41 Pipes acc. ASME/ANSI B31.4 (Liquid petroleum)
BBSYAN49 Openings acc. ASME/ANSI B31.4 (Liquid petroleum))
BBSYAN81 Pipes acc. ASME/ANSI B31.8 (Gas transmission)
BBSYAN89 Openings acc. ASME/ANSI B31.8 (Gas transmission))
BBSAAN37 Pipes subject to external pressure ASME/ANSI B31.3 chapter 304.1.3
BBSYWLET Weldolets

Stress calculation of integral parts (circular, rectangular lugs and nozzles) at cylindrical and spherical shells, using WRC107

WRC107KT         Superposition acc. Kerntechnische Regeln (Germ. nuclear)
WRC107S3 Superposition acc. AD-Rules
WRC107BS Superposition acc. BS5500
WRC107AS Superposition acc. ASME III, Subsections NB3200/NB3600

 

Stress calculation of integral parts (circular, rectangular lugs and nozzles) at cylindrical shells, using WRC297

WRC297KT        Superposition acc. Kerntechnische Regeln (Germ. nuclear)
WRC297S3 Superposition acc. AD-Rules
WRC297AS Superposition acc. ASME III, Subsections NB3200/NB3600
BBSYS36 WRC107+297 with stress superposition according to AD-S3/6
BBSYEN1201 EN12952-3 Ch. 7.11, Cylinder and spherical shells, subject to internal pressure
BBSYEN1202 EN12952-3 Annex A, Elbows
BBSYEN1203 EN12952-3 Chapter 10, Dished heads, subject to internal pressure
BBSYEN1206 EN12952-3 Chapter 8/10 Openings in cylinder- and spherical shells
BBSYEN1207 EN12952-3 Chapter 8/4 Bolts
BBSYEN1230 EN12952-3 Derivation of the test pressure
BBSYENA-09 EN13480-3, Flanged connections
BBSYENA_10 EN12952-3 Chapter 10, self-sealing covers
BBSYST1  D0201: Cyl./Spheres/Cones subject to internal pressure
BBSYST2 D0203: Dished heads, knuckled cones subject to internal pressure/td>
BBSYST3 D0205: Spherically domed and bolted ends
BBSYST4 D0206: Rectangular pipes subject to internal pressure
BBSYST5 D0210: Toroidal bends subject to internal pressure
BBSYST16 D0211: Mitred bends subject to internal pressure
BBSYST6 D0301: Cyl./Spheres/Cones subject to external pressure
BBSYST7 D0303: Dished heads subject to external pressure
BBSYST8 D0401-402: Flat heads
BBSYST9 D0403-405: Tube sheets
BBSYST10 D0501-502: Openings in shells
BBSYST11 D0503: Openings in flat heads
BBSYST12 D0701/0801: Flanged connections
BBSYST13 D0601: Stiffeners
BMATB1 Plates according DIN, AD, VDTÜV, EN
BMATR1   Seamless pipes according DIN, AD, VDTÜV, EN
BMATR3 Welded pipes according DIN, AD, VDTÜV, EN
BMATS1 Bolts according to DIN17240, DIN267
BMATS0 Forgings according AD and VDTuev
BMATS2 Forgings according DIN 17243
BMATB2 Nonferrous plates according AD-W and DIN1745
BMATR2 Nonferrous pipes according AD-W and DIN1746
BMATB3 Plates according EN10028-7, cold formed
BMATG1 Cast material acc. EN10213, EN1563, VDTüV, SEW410
BMATG2 Aluminium cast material VAR, DIN EN1706
BMATBSB1  Plates according British Standard
BMATBSR1 Seamless pipes according British Standard
BMATASB1 Plates according Part D, ASME VIII/1
BMATASR1 Seamless pipes according Part D, ASME VIII/1
BMATASR2 Welded pipes according Part D, ASME VIII/1
BMATASS1 Forgings according Part D, ASME VIII/1
BMATASS0 Bolts according Part D, ASME VIII/1
BMATASG0 Casting according Part D, ASME VIII/1
BMATANB1 Plate & sheet material according ANSI B31.1
BMATANR3 Seamless pipes according ANSI B31.1
BMATANR1 Seamless pipes according ANSI B31.3/4
BMATANR4 Welded pipes according ANSI B31.1
BMATANR2 Welded pipes according ANSI B31.3/4
BMATANS0 Forgings according ANSI B31.1
BMATANS1 Forgings according ANSI B31.1
BMATSAB1 Plates according Stoomwezen/ASME M0201, M0202
BMATSAR1 Seamless pipes according Stoomwezen/ASME M0301, M0302
BMATSAR2 GWelded pipes according Stoomwezen/ASME M0301, M0302
BMATSAS0 SForgings according Stoomwezen/ASME M0601, M0602
BMATSAS1 Bolts according Stoomwezen/ASME M0602, M0701, M0702, M0802
BMATBAB1 Plates according BS5500/ASME / BS5500 enquiry case 91
BMATBAR1 Seamless pipes according BS5500/ASME / BS5500 enquiry case 91
BMATBAR2 Welded pipes according BS5500/ASME / BS5500 enquiry case 91
BMATBAS0 Forgings according BS5500/ASME / BS5500 enquiry case 91

 

Material Databases, International

BMATA2B1 Plates according Part D, ASME VIII/2
BMATA2R1 Seamless pipes according Part D, ASME VIII/2
BMATA2R2 Welded pipes according Part D, ASME VIII/2
BMATA2S1 Forgings according Part D, ASME VIII/2
BMATA2S0 Bolts according Part D, ASME VIII/2
BMATA2G0 Casting according Part D, ASME VIII/2